Two-part system: emitter and corresponding receiver
Short-range (0.8 to 20 m) and long-range (15 to 70 m) models available
Protected heights to 1066 mm
25 mm effective beam diameter
Single-beam “Point” and 2-, 3-, or 4-beam “Grids”
Emitters have short-range and long-range versions (receiver models are the same for both)
Multi-function 7-segment status display LEDs on receiver units
Robust safety-yellow housings rated IEC IP65; NEMA 4 and 13
Selectable trip or latch output in each receiver model
Purchase components individually or as a kit including one receiver, one emitter, a keyed reset switch, and standard mounting hardware
User-supplied cabling is hard-wired into the emitter and receiver housings, no special cables required
Each sensor includes standard brackets that allow ±30° rotation for ease of alignment
Optional swivel mounts and retro-fit brackets are available.
Use with SSM Series corner mirrors and MSA Series stands for guarding a multi-sided application
EZ-SCREEN™ Sensor Dimensions |
Mounting bracket dimensions
|
Sensors may be mounted with mounting flanges directed either "out" (shown below at left) or "in" (shown at righ |
Visit Banner's site below for additional information. Call us for price and delivery.
http://www.bannerengineering.com/products/machine_safety/ezscreen/ezg_sensors.html
Home Page | Profile & Line card | Directory | Eddy Electric
New England Drives & Controls, Inc. ~ Southington, CT 06489
